Firmware

Firmware KineOS 7.3

30
Jan

KineOS 7.3 has comprehensively upgraded the Playback Interface, adding playback menu, clip timeline and clip list, thereby providing a more efficient and convenient experience. The update has reorganized the Frame Line logic, simplifying the process and enhancing work efficiency. Additionally, a new LUT KC709 has been added, at the same time the firmware expanding the Color Temperature range and optimize AWB accuracy, offering users more customized options.

Furthermore, this firmware update introduces practical features including WIFI AP mode, in-camera clip recovery, SDI electronic horizon, and new resolutions catering to diverse user needs and delivering a smoother and more practical operational experience.

1. Playback

1) New Playback Interface
Clip Timeline: Display the timeline information of the current frame in the clip.
Playback Setting: Change Playback Speed, Reverse Play and few settings directly under the playback interface.
Clip List: Allow quick clip searching, making playback more efficient and convenient.

2) Playback Guide
Knob Control: Play/Pause, Fast Forward/Reverse, Increase/Decrease Playback Speed.
Touch Control: Adjust Play/Pause, Playback Speed, Clip list, Playback Menu and Clip Select through touch control.

2. Frame Line

1) Frame Line Settings
More common customization settings with 4 frame line displays available.

2) Common Settings
Added more aspect ratios, frame line types, scaling.

3) Various Frame Line
Support display of 4 different types of frame lines simultaneously.

4) Simple Customization
0-100% scaling settings, simplifying the process.

3. Color Temperature

1) NEW LUT KC_709
Improve Color Display Monitoring and Address Color Accuracy Issues.

2) Improved Color Temperature
Expanded Color Temperature Range: Increased the color temperature range to 200%, providing a broader selection of color temperatures.
--> Original: 2800K-7000K
--> Updated: 2000K-11000K

Custom Color Temperatures: Option to add up to four custom color temperatures, presented in the quick menu.

3) Auto White Balance
Upgraded temperature algorithm for auto white balance, achieving a precision of 10K values.

4. More Features

1) AP Mode
AP mode turns the device into a hotspot, allowing connection to the camera via password.
ID: Kinefinity_xxxx (last 4 digits of the serial number)
Password: kinefinity
 
2) In-Camera Clip Recovery
Added in-camera recovery function to fix damaged materials in certain situations.
 
3) Electronic Horizon on SDI
SDI output now supports the display of an electronic horizon.
 
4) New Resolutions
Added two expanded resolutions for MAVO Edge 6K and MAVO mark2 LF:
S35 4K 4:3 (4096×3072)
S35 4K 6:5 (4096×3432)

Download MAVO Edge 8K firmware： Firmware KineOS 7.3>

Download MAVO Edge 6K firmware： Firmware KineOS 7.3>

Download MAVO mark2 firmware： Firmware KineOS 7.3>

Instruction：Download firmware KineOS 7.3 to FAT/FAT32 USB stick; insert it to USB port of Kine camera; choose upgrade firmware as [Config–>system–>firmware upgrade]. The update job is done about 30 minutes. It takes effect after reboot.

Note：

  • The firmware version before KineOS7.1 needs to be updated to KineOS7.1 first. After the update is successful and rebooted, it can be  updated to KineOS 7.2. After the update is complete successfully, it needs to enter the Calibration mode to calibrate the black balance.

  • Must remove the lens and mounting adapters before update. Upgrading the firmware takes about 30 minutes, never lose power during the process, else it needs to be sent back for repair.